Infrared Heater
Advanced Technology and unique construction design developed by our engineers have helped to offer high tech Infrared Heater in India.
For Your Service
(+91) 992-582-2226
Features Of Our Product
- High surface rating
- Excellent thermal insulation
- Wide operating temperature range
- Unique construction design
- Premium quality raw materials
- High operational efficiently
- Exceptional radiation properties
- Wattage from 500 to 4000
- Volts 230 / 415
Applications
- Lamination Industries
- Drying Textiles
- Shrink Packaging Machines
- Rubber Curing
- Thermoforming
- Plastic Forming
- Drying Lacquers and Paints
Know More
Enhance Your Industrial Processes With Our Efficient Heaters
Ordering Info. Required
- Size of the heater Require
- Volt & Wattage do your require?
- Drawing Or Photo of the Heater If you Have
Range
- Custom Wattage Infrared Ceramic Heater
- Color Changing Infrared Heater
- High Temperature Black Infrared Heater
Know More
Infrared Heaters (FSR Series)
Infrared Heaters (FSR Series)
Our Infrared Heaters are designed to produce maximum output in form of heat energy. They are constructed by a firmly burnt-in heating coil. The heater incorporates highly heatproof resistance wire that provides safety against any damage. We supply Custom Wattage Infrared Ceramic Heaters as per the requirement of our clients.
Longer service life is achieved since the resistance of the heater is made to remain constant over the whole temperature range. The glaze used in this heater has excellent radiation properties therefore the radiation efficiency is also very high. This heater is available with Color Changing Feature as Yellow Ceramic IR Heater (CC FSR).
Our Ceramic Infrared Heater are available in two standard models
1. Full Length 245mm(FSR) 60mm 250 x 1000W
2. Half Length 122mm (FSR/2) 60mm 125 x 50
Know More
Ceramic Flat Infrared Heater (FSF Series)
Ceramic Flat Infrared Heater (FSF Series)
The specialty of these heaters lies in its external stricture. The flat shape of heaters gives them a flexibility to be used with more comfort. They look like a new-age product. There are several advanced features incorporated in these heaters making them better than general heaters. Ceramic Flat Infrared Heater are constructed by a firmly burnt-in heating coil. They consist of high heatproof resistant wire.
Know More
Color Changing Infrared Heater (FSR Series)
Color Changing Infrared Heater (FSR Series)
This is a special type of infrared heater with color-changing feature. Along with a change in temperature the heater changes its color. This is helpful to the users in a sense that there is a visible indication of the level of temperature reached at any given point of time. Where there are large IR Heating Panels with hundreds of heaters installed, it is possible and very easy to determine the non-working heaters just by looking at the color of each heater. This thereby helps in quick & easy replacement of the faulty heater
Know More
Super High Temperature Black Infrared Heater (SHTS Series)
Super High Temperature Black Infrared Heater (SHTS Series)
Super high temperature radiators were developed to increase the previous maximum Possible surface rating of ceramic panel radiators from 64 kw/m2 x 77 kW/m2.
This radiators, produced using the hollow casting ceramic process, are filled with thermal insulation material and have a special black gaze and a gold-plated back. At an operating temperature of 900°C, over 75% of the electrical energy supplied is transferred to the material to be heated as medium to long-wave IR radiation.
This series radiators are therefore particularly suitable for use in plant construction in which special Solution have to be drawn up for the customer’s specific needs and for applications requiring high Outputs.The four designs cover the power range from 300 W to 1200 W and have customary market dimensions. Existing IR equipments can therefore be retrofitted with this series radiators.
Know More
Medium Wave Quartz Infrared Heater
Medium Wave Quartz Infrared Heater
We manufacture and supply superior quality medium wave infrared heater that consists of a helically wound resistance coil housed in a pure vitreous silica fused quartz tube. The quartz tubing is terminated with ceramic insulating caps that are specially designed to allow the quartz tubing to breathe. The ceramic caps are tightly fastened to the quartz tube with high temperature cement that allows the quartz to breathe. Made of high quality material, these are superior in performance and offer long serving life.
Salient Features
- Quartz Infrared Heater is available in diameters of 8, 10, 12, 15 and 19 mm
- Available in lengths from 300 to 1500 mm
- Can be used only in horizontal position
- Fitted with specially designed heating coil to ensure longer life
- Least maintenance required
Know More
Medium Wave Infrared Heating Modules
Medium Wave Infrared Heating Modules
Our medium wave infrared heating modules are configured with a resistance wire, which is enclosed in a Quartz Tube of 8mm outer diameter. The quartz tubes are placed parallel to each other and are mounted in a special housing. The size of this heater is such that they can replace Ceramic Infrared Heater.
Specifications
| Type Length | Width | Power Rating* |
| Full Length | 248mm 63mm | 250 x 1000W |
| Half Length | 125mm 63mm | 125 x 650W |
Know More
Twin Tube Short Wave Infrared Module
Twin Tube Short Wave Infrared Module
This is made up of 8-shape high-purity clear quartz twin tube, each tube has Heating Coil of Tungsten material which runs in U shape in the tube which is filled with halogen gas.
Salient Features
- Power Density up to 150KW/m2 is achieved. Heating up and cooling down time is approximately one second
- These heaters are available with gold reflector and without reflector
- Reflector is in the form of gold coating on outer rear side of the tube
- Due to reflector heat loss from backside is prevented and thus power saving is achieved
- This also results in making surrounding work area cooler
- This also increases the efficiency and directionality of the heater
- There are two standard sizes 11 mm x 23 mm and 15 mm x 32 mm in cross section. Maximum length available is 2000 mm
Know More
Fast Medium Wave Infrared Heater
Fast Medium Wave Infrared Heater
Our twin tube fast medium wave infrared heater has a filament tungsten wire and this tube is filled with halogen gas. The round ceramic base of this heater has a lead wire of 500mm size (one end or two ends) & it is also configured with lead and insulated wires.
Specifications: We make available this type of heater in standard size of
- Outer diameter of the tube: 11×23mm transparent quartz glass
- Temp. of filament :1600
- Wave length : 1.5u – 2.0u
Know More
Short Wave IR Lamp
Short Wave IR Lamp
Short Wave IR Lamp transmits heat in the form of electromagnetic waves at a velocity of approximately 3,00,000 Km/Sec i.e., at the speed of light.
These lamps are not only the fastest in transmitting heat but are most suitable for specific applications involving vacuum technology and dust free (clean room) conditions.
Advantage
- Heating is done by radiation, this eliminates loss of energy used for heating media and heat loss due to convection
- Here the infrared waves penetrate the material, on which it falls and delivers the heat directly to that material
Models Available
Short wave IR lamps are available in different lengths from 5″ to 30″ or as per customer specifications.
| Code | Heated Length HL (mm) | Overall Length OL (mm) | Wattage (W) | Voltage (V) |
| SW 500 | 127 | 212 | 500 | 240 |
| SW 1000 | 254 | 348 | 1000 | 240 |
| SW 1600 S | 406 | 500 | 1600 | 240 |
| SW 1600 D | 406 | 500 | 1600 | 415 |
| SW 2000 S | 508 | 626 | 2000 | 240 |
| SW 2000 D | 508 | 626 | 2000 | 415 |
| SW 2500 D | 635 | 728 | 2500 | 415 |
| SW 3000 S | 508 | 626 | 3000 | 240 |
| SW 3000 D | 765 | 875 | 3000 | 415 |
Know More
Twin Tube Short Wave Infrared Module
Twin Tube Short Wave Infrared Module
This is made up of 8-shape high-purity clear quartz twin tube, each tube has Heating Coil of Tungsten material which runs in U shape in the tube which is filled with halogen gas.
All Deatils
- Power Density up to 150KW/m2 is achieved. Heating up and cooling down time is approximately one second
- These heaters are available with gold reflector and without reflector
- Reflector is in the form of gold coating on outer rear side of the tube
- Due to reflector heat loss from backside is prevented and thus power saving is achieved
- This also results in making surrounding work area cooler
- This also increases the efficiency and directionality of the heater
- There are two standard sizes 11 mm x 23 mm and 15 mm x 32 mm in cross section. Maximum length available is 2000 mm
Know More
Short Wave Infrared Module:
Short Wave Infrared Module:
- Infrared modules are the ideal solution for the application of infrared heat technology
- They save the user design costs and time and are substantially less expensive than the complete infrared systems
- They are complete and ready for the operation
- This provides advantages for both the, user while installing in to the existing systems and for the planing / project engineers
- Infrared modules can be individually regulated, controlled and ventilated
Because of its modular construction it is possible to make the heating panels of practically any size with heaters length up to 40
Applications
- Curing of paint
- Powder coating
- Lacquers Drying
- Printing ink
- Drying Glaze on Ceramic Tiles
- Drying Gumming Sheets
- Drying Adhesives Tapes
- Latex paper
- Textile
- Car body works
| Overall Dimensions(mm) | Lamp Specification | ||||||||
| Module Code | Length | Depth | Lamp Used | Heat Length | Watts | Volt | |||
| IRN 500 | 310 | 80 | 55 | SW 500 | 127 | 500 | 240 | ||
| IRN 1000 | 460 | 80 | 55 | SW 1000 | 254 | 1000 | 240 | ||
| IRN 1600 S | 610 | 80 | 55 | SW 1600 S | 406 | 1600 | 240 | ||
| IRN 1600 D | 610 | 80 | 55 | SW 1600 S | 406 | 1600 | 415 | ||
| IRN 2000 S | 725 | 80 | 55 | SW 2000 S | 508 | 2000 | 240 | ||
| IRN 2000 D | 725 | 80 | 55 | SW 2000 D | 508 | 2000 | 415 | ||
| IRN 2500 D | 825 | 80 | 55 | SW 2500 D | 635 | 2500 | 415 | ||
| IRN 3000 S | 725 | 80 | 55 | SW 3000S | 508 | 3000 | 240 | ||
| IRN 3000 D | 975 | 80 | SW3000D | 765 | 3000 | 415 | |||
Frequently Asked Questions
It depends on the wattage, material type, and process requirement. Too close and the material scorches. Too far and heat transfer becomes inefficient. Start with the manufacturer’s recommendation for the particular type of heater, then adjust depending on how the material behaves during a trial run. For ceramic infrared heaters in thermoforming or lamination, the distance is usually between 50 mm and 200 mm depending on watt density and material sensitivity.
Infrared energy drops significantly as distance increases. Double the distance and the energy reaching the surface reduces to roughly a quarter. Getting the distance right directly affects how much of the heater’s output is doing useful work.
Scorching, discoloration, uneven heating, or surface bubbling. Running too close can also cause the heater itself to run hotter than designed, which shortens coil life. If any of these appear, increase the distance and recheck.
Isolate the heater completely before touching any connections. Check terminal connections for tightness and heat discoloration, which points to arcing from a loose contact. Check plugs and sockets for pitting or burning on the contact surfaces. A loose connection does not always trip a breaker immediately. It creates resistance heat at the contact point that causes damage over time.
Check the element resistance at room temperature with a multimeter and compare against the rated specification. A reading significantly outside that value points to a degraded coil. Also confirm the supply voltage matches the heater rating. Running a 230V heater on 415V destroys the coil quickly.
Resistance heat builds at the loose contact, overheating the terminal and degrading the insulation around the wire until the connection fails. In a heater bank, one loose connection can go undetected for a long time since the others keep working. The colour changing infrared heater variant helps here because a non-functioning unit is immediately visible against the rest of the bank.
The heater resistance is constant over the entire operating temperature range. That consistency helps maintain a steady and predictable power output, which is what gives the heater its long service life. This constant resistance characteristic is a standard design feature of our ceramic infrared heaters.
500W to 4000W, at 230V or 415V. Custom wattages available for specific process requirements. Tell us the size, voltage, and wattage required, and we will confirm the correct configuration.